PURPOSE: As a final polish that gives protection and beautify wood surfaces, iron on the inside and outside.
Note : Especially for new walls of stucco or concrete , not it is recommended to use this type of alkyd paint , because it can happen saponification ( saponification ) which will decompose the resin alkyd and oil reacts with alkali to be like soap , so if not dry paint layer .
Type: Alkyd synthetic
Gloss: Very gloss
Color: See color card
Specific Gravity: 0.90 - 1:20 Kg / Liter
Theoretical dispersive power: 12-14 m2 / liter for dry layer thickness 35 micron
Speed drying: Dry surface: 2-4 hours ( Depending on humidity )
Perfect Dry 24 hours an interval of 16 hours
Paint preferably one night to get the results okay.
HOW TO USE:
Brush or Roller: Dilute 5 % - 10 % with thinner synthetic
Conventional spray equipment: Dilute 10-20 % with thinner synthetic
1. The appearance and durability of paint layers depends on the preparation of the surface to be painted
2. Before painting, clean the wax, grease and other dirt attached to the surface to be painted.
3. Layer old paint had chipped scraped through to the bottom surface
4. Rust that there should be cleaned with sandpaper or steel brush to clean as possible then given anti- rust primer .
Diluent : Synthetic Thinner
Packaging Size : 0.1 ltr , 0.3 ltr , 0.8 ltr , 3.78 ltr , 20 ltr
Storage : Store in a shady and humid for avoiding damage to cans .